welinkschem

This product is an organic solvent with excellent performance, which is widely used because of THFs characteristics such as fast dissolution speed and good penetration and diffusion to the surface and inside of resin. Tetrahydrofuran (109-99-9) is used as solvent in format reaction, polymerization reaction, LiAlH4 reduction condensation reaction and esterification reaction. Dissolution of polyvinyl chloride, polyvinylidene chloride and their copolymers gives low-viscosity solutions, which are often used in the manufacture of surface coatings, protective coatings, adhesives and films.

N-Methylpyrrolidone is an organic substance with the chemical formula C5H9NO, a colorless to light yellow transparent liquid with a slight ammonia odor, miscible with water in any proportion, soluble in various organic solvents such as ether, acetone and esters, halogenated hydrocarbons, aromatic hydrocarbons, etc., and almost completely mixed with all solvents.

Polytetrahydrofuran (PTMEG) is a waxy white solid that melts to a colorless, clear, viscous liquid near room temperature. PTMEG is produced by the catalytic polymerization of tetrahydrofuran (THF). The primary uses of PTMEG are in the production of spandex (polyurethane) fibers, polyurethane elastomers, and copolyester-ether elastomers.

1.4-Butanediol ( BDO ) is used industrially as a solvent and in the manufacture of certain types of plastics, elastic fibers and polyurethanes. In organic chemistry, 1.4-butanediol is used in the synthesis of gamma-butyrolactone (GBL). In the presence of phosphoric acid and high temperatures, 1.4-Butanediol dehydrates into the important solvent tetrahydrofuran. At about 200°C, in the presence of a soluble ruthenium catalyst, the diol undergoes a dehydrogenation reaction to form butyrolactone. BDO is used to synthesize 1,4-butanediol diglycidyl ether, which is then used as an epoxy resin diluent.

Poly butylene adipate-co-terephthalate (PBAT), also known as polybutylene terephthalate, is a semi-aromatic, biodegradable thermoplastic copolymer that can be easily molded and thermoformed. Poly butylene adipate-co-terephthalate is a random copolymer of 1,4-butanediol, adipic acid, and dimethyl terephthalate (DMT) monomers. PBAT has many attractive properties similar to polyethylene. For example, poly butylene adipate-co-terephthalate has a relatively high elongation at break (30-40%).

Tetrahydrofuran is a heterocyclic organic compound with the molecular formula C4H8O. THF belongs to the group of ethers and is a fully hydrogenated product of furan, a colorless, water miscible organic liquid with a low viscosity at room temperature and pressure. The chemical formula of this cyclic ether can be written as (CH2)4O. Due to its long liquid range, THF is a commonly used medium-polar nonprotonic solvent. Its main use is as a precursor for polymers. Although the odor and chemical properties of tetrahydrofuran are very similar to those of ether, its anesthetic effect is very poor.

1-Methyl-2-Pyrrolidone is used to recover certain hydrocarbons generated during the processing of petrochemicals, such as the recovery of 1,3-butadiene and acetylene. NMP can be used to absorb hydrogen sulfide from acid gases and hydrodesulfurization facilities. Its good solvency properties allow NMP to be used to dissolve various polymers. Specifically, N-Methylpyrrolidone is used as a surface treatment solvent for textiles, resins and metal-coated plastics, or as a paint stripper.

Polytetramethylene ether glycol (PTMEG) is a waxy white solid that melts to a clear, colorless, viscous liquid near room temperature. PTMEG is produced by the catalytic polymerization of tetrahydrofuran (THF). The main applications of PTMEG are the production of spandex (polyurethane) fibers, polyurethane elastomers, and copolyester-ether elastomers. 

BDO must keep its temperature not lower than 20℃ during storage and transportation, which can avoid crystallization and facilitate loading and unloading. 1.4-Butanediol (BDO) is a colorless viscous flammable liquid with chemical formula C4H10O2, miscible with water, soluble in methanol, ethanol and acetone, slightly soluble in ether.

Poly Butylene Adipate-Co-Terephthalate is a thermoplastic biodegradable plastic, which is a copolymer of butylene glycol adipate. PBAT has characteristics of both PBA and PBT, good ductility and elongation at break, as well as good heat resistance and impact properties.

Tetrahydrofuran is a colorless and transparent liquid with ether-like odor, can be miscible with water. The miscible with water can dissolve alkaloids such as cellulose acetate and caffeine, and the dissolution performance is better than that of tetrahydrofuran alone. General organic solvents such as ethanol, ether, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated hydrocarbons, etc. THF can be well dissolved in tetrahydrofuran.

1.4-Butanediol (chemical formula: HOCH2CH2CH2CH2OH) is one of the isomers of butanediol, a terminal dihydroxy substituent of butane, which is a colorless, viscous liquid at room temperature. Industrially, BDO is produced by allowing acetylene to react with two molecules of formaldehyde to form BDO, which is then hydrogenated. BDO can also be obtained by gas-phase hydrogenation of anhydrides.

Poly butylene adipate-co-terephthalate (PBAT) is a well-known aliphatic-aromatic biodegradable random copolyester. PBAT can be synthesized by polycondensation reactions in the melt phase. However, the synthesis process is very complex as PBAT requires high esterification temperatures, as well as vacuum to achieve molecular weights suitable for different grades.

Tetrahydrofuran is a heterocyclic organic compound with the molecular formula C4H8O. THF belongs to the group of ethers and is a fully hydrogenated product of furan, a colorless, water miscible organic liquid with a low viscosity at room temperature and pressure. The chemical formula of this cyclic ether can be written as (CH2)4O. due to its long liquid range, THF is a commonly used medium-polar nonprotonic solvent. Its main use is as a precursor for polymers. Although the odor and chemical properties of THF are very similar to those of ether, its anesthetic effect is very poor.

N-Methylpyrrolidone is a colorless to light yellow transparent liquid, highly hygroscopic, miscible with most organic solvents such as water, ethanol, ether, acetone, ethyl acetate, chloroform and benzene. Chemically stable, but acid or alkali will rupture the lactam ring. NMP is used to recover certain hydrocarbons generated during the processing of petrochemicals, such as the recovery of 1,3-butadiene and acetylene. NMP can be used to absorb hydrogen sulfide from acid gases and hydrodesulfurization facilities. Its good solvency properties have led to NMP being used to dissolve various polymers. Specifically, NMP is used as a solvent for surface treatment of textiles, resins and metal-coated plastics, or as a paint stripper.

Polytetramethylene ether glycol (PTMEG) is a waxy white solid that melts to a colorless, clear, viscous liquid near room temperature. PTMEG is produced by the catalytic polymerization of tetrahydrofuran (THF). The main applications of PTMEG are the production of spandex (polyurethane) fibers, polyurethane elastomers, and copolyester-ether elastomers.

1.4-Butanediol has a wide range of uses. For the production of gamma-butyrolactone and polybutylene terephthalate, the latter being a rapidly developing engineering plastic. 1.4-butanediol is used as a chain extender and polyester raw material for the production of polyurethane elastomers and flexible polyurethane foam. The esters made from 1.4-butanediol are good plasticizers for cellulose and polyesters. 1.4-Butanediol has good hygroscopic flexibility and can be used as gelatin softener and treatment agent for cellophane and other unused paper. BDO can also prepare N-methylpyrrolidone, N-vinylpyrrolidone and other pyrrolidone derivatives, also used in the preparation of vitamin B6, pesticides, herbicides and the role of a variety of process solvents, lubricants, humidifiers, softness, adhesives and intermediates in the electroplating industry brightener, solvent, wetting agent, plasticizer. Manufacturing polyurethane high elasticity of cross-linking agent, organic synthesis. BDO can

Poly Butylene Adipate-Co-Terephthalate is a thermoplastic biodegradable plastic, which is a copolymer of butylene adipate and butylene terephthalate. PBAT has the characteristics of both PBA and PBT, with good ductility and elongation at break, as well as good heat resistance and impact performance; in addition, PBAT also has excellent biodegradability, and is one of the most popular and best degradable materials in biodegradable plastic research and market application.

Tetrahydrofuran , a heterocyclic organic compound with the molecular formula C4H8O, is an ether, a fully hydrogenated product of the aromatic compound furan, which is a colorless, miscible with water, organic liquid with a small viscosity at room temperature and pressure.

Poly Butylene Adipate-Co-Terephthalate is a thermoplastic biodegradable plastic, which is a copolymer of butylene adipate and butylene terephthalate. PBAT has the characteristics of both PBA and PBT, with good ductility and elongation at break, as well as good heat resistance and impact performance; in addition, PBAT also has excellent biodegradability, and is one of the most popular and best degradable materials in biodegradable plastic research and market application.

N-Methylpyrrolidone (NMP) is an organic substance with the chemical formula C5H9NO, a colorless to light yellow transparent liquid with a slight ammonia odor, miscible with water in any proportion, soluble in various organic solvents such as ether, acetone and esters, halogenated hydrocarbons, aromatic hydrocarbons, etc., and almost completely mixed with all solvents.

Polytetramethylene ether glycol   is a homopolymer obtained by cationic ring-opening polymerization of the monomer tetrahydrofuran (THF) in the presence of a catalyst. PTMEG is a linear polyether glycol with primary hydroxyl groups. At room temperature, PTMEG is a white waxy solid. When the temperature exceeds room temperature, PTMEG is melted into a clear, colorless liquid. PTMEG is readily soluble in alcohols, esters, ketones, aromatic and chlorinated hydrocarbons and insoluble in aliphatic hydrocarbons and water.

1,4-Butanediol (BDO) is an organic substance with molecular formula C4H10O2 and molecular weight 90.12. Appearance is colorless or light yellow oily liquid. Flammable, freezing point 20.1℃, refractive index 1.4461. soluble in methanol, ethanol, acetone, slightly soluble in ether. 1.4-Butanediol (BDO) is hygroscopic and has a bitter taste, but slightly sweet in the mouth. Used as solvent and humidifier, also used as plasticizer, drug, polyester resin, polyurethane resin, etc.